J&R BROTHER CORP LIMITED provide novelty things!
+86-769-83627166-106
语言切换






新闻banner
NEWS
CENTER
Mini Lava Lamp Shake and Shine Glitter Light tells how to make the heating device of the lava lamp?
Lava lamp is also called wax lamp. Its principle is to use simple thermodynamic principles to make liquid wax move up and down like lava in a sealed glass bottle, forming a magical light and shadow effect. The existing lava lamp generally has a heating device at the bottom, and a transparent container on the top. The transparent container contains liquid and waxy solids whose density changes with temperature. The heating device generates heat and transfers from the bottom to the transparent container. The wax at the bottom melts and becomes lighter after being heated, and then slowly rises, and when it gets colder, it slowly falls down again, thus producing a floating effect. Let’s follow the editor of Mini Lava Lamp Shake and Shine Glitter Light to learn about its heating device manufacturing method!
1. A heating device for a lava lamp, including a heating wire, characterized in that it also includes a mounting frame made of insulating material. The heating wire is spirally wound on the mounting frame to form a heating coil, and each circle wound on the mounting frame generates heat There is a distance between the coils, and the pins at both ends of the heating wire extend from the mounting frame.
2. There is one or more heating structures. When a single heating structure is provided, an insulating bottom layer filled with insulating material is arranged at the bottom of the heating structure, and an insulating surface layer filled with insulating material is arranged on the upper part of the heating structure to form Heating components; when two or more heating structures are provided, the heating structures are stacked and arranged, and an insulating bottom layer filled with insulating material is arranged at the bottom of the heating structure of the bottom layer, and insulation filled with insulating material is arranged on the top of the heating structure For the surface layer, an insulating intermediate layer filled with insulating material is arranged between adjacent heating structures to form a heating component.
3. It also includes a metal heat-conducting upper cover and a metal heat-conducting lower cover, the metal heat-conducting upper cover is arranged on the upper part of the heating component, and the metal heat-conducting lower cover is arranged on the bottom of the heating component.
4. A number of internal tooth-shaped grooves are provided on the inner side of the mounting frame, and a number of external tooth-shaped grooves corresponding to the internal tooth-shaped grooves are provided on the outside of the side of the mounting frame. The heating wire passes through the internal tooth-shaped grooves and the outer toothed grooves. The tooth-shaped groove is wound on the mounting frame, and the heating wire is positioned on the position of the inner tooth-shaped groove and the outer tooth-shaped groove.
The above is the Mini Lava Lamp Shake and Shine Glitter Light editor introducing the method of making the heating device of the lava lamp. I hope you can learn more.