J&R BROTHER CORP LIMITED provide novelty things!
+86-769-83627166-106
语言切换






新闻banner
NEWS
CENTER
Low price Portable Desktop Fiber Lamp introduces the installation of fiber optic lamps
How much do you know about the installation knowledge of fiber optic lights? Follow the editor of Low price Portable Desktop Fiber Lamp to have a simple understanding!
1. Light emitter installation
Generally, the light-emitting device should be placed in a place that is convenient to operate, easy to maintain, and inaccessible to outsiders. Indoor type illuminators can be directly installed on the special bracket in the electric shaft, or they can be placed in the distribution box with a lock, mounted against the wall or embedded in the wall; outdoor type illuminators can be directly installed in the outdoor dedicated On the bracket, it can also be placed in an outdoor rainproof box with a lock, against a wall or installed on an angle steel bracket. The metal protective shell and metal installation accessories of the system should be reliably electrically connected to the lightning protection device on the roof. When installing, it should be equipped with a reliable power socket according to the actual situation on the spot.
2. Fiber optic installation
The laying of point-emitting optical fibers is similar to ordinary cables. They can be laid through PVC plastic pipes or along plastic trunking. The overall length should be as straight as possible to reduce bending to prevent bending light loss. If there is a bend, its turning radius should be greater than or equal to 12 times its diameter. The line-emitting optical fiber is generally laid on the surface of the billboard, the surface of the building or the surface of the inner wall of the building. It can be fixed by staples or lashing tape. The turning radius should be greater than or equal to 20 times its diameter when bending. Good waterproof treatment.
3. Connection of point light fiber and light emitting terminal accessories
Generally, a dedicated connection kit is used to connect the point-emitting optical fiber and the light-emitting terminal accessories together. In order to ensure the light output of the system, ensure that the light-emitting terminal accessory interface port is clean during installation, the cutout of the light-emitting fiber should be straight and clean, and dust-proof measures should be taken during the entire connection process.
The above is the story of the editor of Low price Portable Desktop Fiber Lamp: a brief introduction to the installation knowledge of fiber optic lamps.